After being told that we can actually use handphone cameras to detect IR light, we tried it and found that with our current setup (IR lights aligned to the acrylic, but not shining into it using TIFR) the range of refracted light is very small, and even if we used LEDs all around the screen it would give us only a usable 10x10cm screen; not desirable.
We shall order more LEDs asap, and this coming week we will build some sort of stand for the screen, and begin to try different methods to use TIFR.
Friday, May 15, 2009
Tuesday, April 14, 2009
Problems found after testing
Tested with one of the 2 pieces of acrylic(it works with both pieces, but it is difficult for one person to hold it all together), and found that a screen is not necessary to refract the light; that is, any object that crosses the path of the IR light will bounce it toward the Wiimote, and it is detected as a tracking point.
Tested with paper alone. The IR LED is able to shine brightly enough through the paper to register on the Wiimote up to 30cm, but when refraction is tried it does not work at all.
Highest distance tested with paper and one piece of acrylic(should go higher with a proper setup and more than 2 hands): 30cm.
Voltage: 9v battery
Number of IR LEDs: 1
Problem: 1 IR LED on 9v only shines far enough to give about 5cm distance in one direction, with about 2 to 3cm to the side. i.e one LED only gives about 25 square cm of 'touchable' space at max. Not very usable for a large screen.
Improvements: Build a prototype setup for more stability and higher accuracy.
Find out the maximum distance the IR light can be refracted till, and which LED gives the highest distance. Also consider ways to power up setup distributing enough power to each IR LED to shine far enough.
Other possible materials: Frosted wallpaper, Tracing paper
Tested with paper alone. The IR LED is able to shine brightly enough through the paper to register on the Wiimote up to 30cm, but when refraction is tried it does not work at all.
Highest distance tested with paper and one piece of acrylic(should go higher with a proper setup and more than 2 hands): 30cm.
Voltage: 9v battery
Number of IR LEDs: 1
Problem: 1 IR LED on 9v only shines far enough to give about 5cm distance in one direction, with about 2 to 3cm to the side. i.e one LED only gives about 25 square cm of 'touchable' space at max. Not very usable for a large screen.
Improvements: Build a prototype setup for more stability and higher accuracy.
Find out the maximum distance the IR light can be refracted till, and which LED gives the highest distance. Also consider ways to power up setup distributing enough power to each IR LED to shine far enough.
Other possible materials: Frosted wallpaper, Tracing paper
Tuesday, January 27, 2009
Genesis
And the FYP Blog is BORN amidst Cheeseburgers and Mcspicy meals.
Have just gotten Wiimote and test acrylic board from Mr Teo. Yuan Feng will sand down an edge of the board. Other components with Benjamin (Wiimote, 4 Emitter LEDs, 4 220 ohm resistors). BTW Julian made this blog.
Happy Chinese New Year!!!!! Best wishes to our project too!!!!!
Have just gotten Wiimote and test acrylic board from Mr Teo. Yuan Feng will sand down an edge of the board. Other components with Benjamin (Wiimote, 4 Emitter LEDs, 4 220 ohm resistors). BTW Julian made this blog.
Happy Chinese New Year!!!!! Best wishes to our project too!!!!!
Subscribe to:
Posts (Atom)